LM324N datasheet, LM2902N datasheet

LM2902,LM324/LM324A,LM224/LM224A – Quad Operational Amplifier

 Features
• Internally Frequency Compensated for Unity Gain
• Large DC Voltage Gain: 100dB
• Wide Power Supply Range:
   LM224/LM224A, LM324/LM324A : 3V~32V (or ±1.5 ~16V)
   LM2902: 3V~26V (or ±1.5V ~ 13V)
• Input Common Mode Voltage Range Includes Ground
• Large Output Voltage Swing: 0V to VCC -1.5V
• Power Drain Suitable for Battery Operation

 Description
The LM324/LM324A,LM2902,LM224/LM224A consist of four independent, high gain, internally frequency compensated operational amplifiers which were designed
specifically to operate from a single power supply over a wide voltage range. operation from split power supplies is also possible so long as the difference between the two supplies is 3 volts to 32 volts. Application areas include transducer amplifier, DC gain blocks and all the conventional OP Amp circuits which now can be easily implemented in single power supply systems.

LT1081CN datasheet, specs, sources, pdf

LT1081CN Datasheet, Specs, Sources & PDF
Spec: Advanced Low Power 5V RS232 Dual

FEATURES

* Superior to CMOS
– Improved Speed: Operates over 120kBaud
– Improved Protection: Outputs Can Be Forced
to ±30V without Damage
– Three-State Outputs Are High
Impedance When Off
– Only Needs 1mF Capacitors
* Absolutely No Latchup
* CMOS Comparable Low Power: 60mW
* Can Power Additional RS232 Drivers: 10mA
* Supply Current in Shutdown: 1mA
* Available in SO Package
* Available with or without Shutdown

APPLICATIOUS

Portable Computers
* Battery-Powered RS232 Systems
* Power Supply Generator
* Terminals
* Modems

max232cpe datasheet

Maxim Integrated Products 

max232cpe (+5V-Powered, Multichannel RS-232 Drivers/Receivers)

General Description
The MAX220–MAX249 family of line drivers/receivers is
intended for all EIA/TIA-232E and V.28/V.24 communications
interfaces, particularly applications where ±12V is
not available.
These parts are especially useful in battery-powered systems,
since their low-power shutdown mode reduces
power dissipation to less than 5μW. The MAX225,
MAX233, MAX235, and MAX245/MAX246/MAX247 use
no external components and are recommended for applications
where printed circuit board space is critical.
________________________Applications
Portable Computers
Low-Power Modems
Interface Translation
Battery-Powered RS-232 Systems
Multidrop RS-232 Networks

AD8362ARU Datasheet

FEATURES
Complete fully calibrated measurement/control system
Accurate rms-to-dc conversion from 50 Hz to 2.7 GHz
Input dynamic range of >60 dB: −52 dBm to +8 dBm in 50 Ω
Waveform and modulation independent, such as GSM/CDMA/TDMA
Linear-in-decibels output, scaled 50 mV/dB
Law conformance error of 0.5 dB
All functions temperature and supply stable
Operates from 4.5 V to 5.5 V at 24 mA from −40°C to +85°C
Power-down capability to 1.3 mW
APPLICATIONS
Power amplifier linearization/control loops
Transmitter power control
Transmitter signal strength indication (TSSI)
RF instrumentation

 

Hello world!

Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!